uKeg 128 Copper Plated Pressurised Growler With Tap
The uKeg 128 pressurised growler available in a bright copper-plated finish for a true, old-fashioned brewery look. The uKeg 128 will keep your drinks fresh and carbonated for two weeks, and cold for 8 hours. On the go or at home. Durable, double-wall vacuum insulated stainless steel. CO2 regulator cap with customisable tap handle and gauge. Brass carrying handle. Includes two 16 gram CO2 cartridges.
Capacity: 128 oz (3785 ml) = 8-10 beers
Dimensions: 6.8in x 9.3in x 11.9in (172mm x 235mm x 303mm)
Note: Cannot ship express outside of WA // orders going outside of WA will be sent using eparcel parcel post road transport service only. Do not select express post if you reside outside of WA.
- uKeg – keep beer fresh for weeks.
- VPR Cap – automatically regulates pressure to optimally carbonate beer. Choose desired carbonation level, from zero (off) up to 15 psi.
- Vessel – durable, double-wall vacuum-insulated stainless steel.
- Pressure Gauge – easily read the pressure inside the growler.
- Dispenser Tap – easily pours beer anytime, without removing the cap. Plus taplock to prevent dispensing.
- Interchangeable Tap Handle – handle can be changed to personalize or represent your favourite brewery.
- Sight Glass – shows contents of uKeg and how much is left.
- CO2 Cartridge – uses low cost, food-grade CO2 cartridges.
No one likes flat beer, but too much fizz in the wrong beer isn’t very good either. The chart below should help you choose the right carbonation for your brew. And keep in mind, this is just a guide, you can always experiment to suit your own taste!
|Stouts, Porters, Cream Ales, Barley Wines||3-6 PSI|
|Brown Ales, Ambers, Red Ales||5-8 PSI|
|IPAs, Pale Ales, Wheat Beers, Other Ales||7-10 PSI|
|Lagers, Pilsners, Ciders, Kombuchas||9-12 PSI|
Out of stock